Pretoria based · Delivering nationwide

8″ Borehole Pumps

8VP 98-13 8″ Borehole Pump 55kW – 278m Max Head

  • 8″
  • 55 kW
  • 278 m head

From R42,400.00

In stock

8" 8VP98 borehole pump, 55kW, up to 278m head. Available as a complete three-phase set or pump end only.

Configuration: choose one
Need a formal quote?For companies, projects or more than one unit – we email a written quote with delivery.
  • Nationwide deliveryShipped from Pretoria
  • 12-month warrantyAgainst manufacturing defects
  • Expert advice061 744 1001
  • Secure checkoutPayFast: card, Instant EFT & more

Code: BH-8VP98-13 Category:

Overview

The 8VP 98-13 is an 8" stainless steel multistage submersible borehole pump from the 8VP98 range (nominal flow around 98 m³/h), delivering heads of up to 278m and flows up to 120 m³/h. It runs on a three-phase supply (380V or 525V). Choose a complete set, or just the pump end if you are replacing a worn one.

At a glance: delivers about 80.1 m³/h (80 100 litres per hour) at 185m head. Best for large irrigation schemes, municipal water supply and mine dewatering from high-yield boreholes.

Available options:

  • 380V set: pump + water-filled motor (no starter): 8VP 98-13 pump end + 55kW 380V three-phase water-filled 8" motor (starter panel not included)
  • 525V set: pump + water-filled motor (no starter): 8VP 98-13 pump end + 55kW 525V three-phase water-filled 8" motor (starter panel/VSD not included)
  • Pump end only (no motor): 8VP 98-13 pump end (wet end) only – to replace a worn pump end on an existing 55kW 8" motor
  • Motor power: 55kW
  • Pump diameter: 8" – needs a borehole with an internal diameter of at least 200mm
  • Stainless steel pump construction

Performance Table:

Flow (m³/h) Flow (l/min) Head (m)
0 0 278
20 333 267
40.5 675 239
60.6 1010 210
70.2 1170 197
80.1 1335 185
90 1500 171
100.2 1670 150
110.1 1835 122
120 2000 92

Choosing the right pump: add the depth to your borehole’s pumping water level, the height up to your tank or reservoir and about 10% for pipe friction – that’s your total head. Pick a pump whose head at the flow you need is higher than that total. Your borehole must also be able to deliver that flow – ask your driller for the yield-test result, otherwise the pump can run the borehole dry. Not sure which pump fits? Send us your borehole depth, water level, yield and how far/high you need to pump and we’ll recommend the right model before you order.

Oil-filled or water-filled motor? Both drive the pump in the same way. Oil-filled motors are sealed units (rated 25 bar). Water-filled motors (rated 35 bar) can usually be rewound if they burn out, which normally makes repairs cheaper on bigger motors.

Starter / controller: motors above 30kW need a soft starter, star-delta panel or VSD sized by your electrician – these are not included. Ask us for a quote on the complete installation. See all Borehole Controllers.

Not included: submersible cable, rope, delivery pipe and base plate. Large borehole pumps are often supplied to order – contact us to confirm stock and delivery time.

Performance curve

8VP98-13 · 55 kW

050100150200250300350020406080100120140 0 m³/h (0 l/min) → 278 m20 m³/h (333.33 l/min) → 267 m40.5 m³/h (675 l/min) → 239 m60.6 m³/h (1010 l/min) → 210 m70.2 m³/h (1170 l/min) → 197 m80.1 m³/h (1335 l/min) → 185 m90 m³/h (1500 l/min) → 171 m100.2 m³/h (1670 l/min) → 150 m110.1 m³/h (1835 l/min) → 122 m120 m³/h (2000 l/min) → 92 m Flow (m³/h) Head (m)

Check your duty point Enter the flow you need and the total head (height + pipe friction).

Show the data table
Flow m³/h02040.560.670.280.190100.2110.1120
Flow l/min03336751010117013351500167018352000
Head m27826723921019718517115012292

Source: Vega 8VP Borehole 24-01 catalogue. Performance at 50 Hz with clean water at 20 °C; actual duty within ISO 9906 tolerances.

Reviews

There are no reviews yet.

Be the first to review “8VP 98-13 8″ Borehole Pump 55kW – 278m Max Head”

Your email address will not be published. Required fields are marked *

8VP 98-13 8″ Borehole Pump 55kW – 278m Max HeadFrom R42,400.00
Choose options

Free pump sizing advice

Not sure which pump you need?

Send us your borehole depth, water level and yield – or how many taps and showers you need to run – and we’ll recommend the right pump, motor and controller.

Chat