CPM170 Booster Pump Combo 1.1kW 220V (with Flow Controller)
- 1.1 kW
- 220 V
R5,560.00
In stock
Pre-assembled CPM170 centrifugal booster kit with automatic flow controller – up to 35m head.
- Nationwide deliveryShipped from Pretoria
- 12-month warrantyAgainst manufacturing defects
- Expert advice061 744 1001
- Secure checkoutPayFast: card, Instant EFT & more
Overview
Ready-to-use household pressure booster built on the CPM170 centrifugal pump, pre-assembled with an automatic flow controller, wiring and plug.
- Power: 1.1kW, 220–240V
- Maximum head: 35m
- Best for: boosting water pressure from a tank to a home
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 35 |
| 0.6 | 10 | 34.1 |
| 1.2 | 20 | 33.3 |
| 1.8 | 30 | 32.6 |
| 2.4 | 40 | 31.8 |
| 3 | 50 | 31 |
| 3.6 | 60 | 30.2 |
| 4.8 | 80 | 27.3 |
| 6 | 100 | 20.8 |
| 7.2 | 120 | 6 |
What is a booster combo? The pump comes pre-assembled with an automatic flow controller, wiring and a 3-point moulded plug – connect the pipes, plug it in and it runs by itself: the pump starts when you open a tap and stops when the flow stops.
Choosing the right booster pump: count the taps and showers that will run at the same time and how high the water must go (a double-storey house needs more head than a single storey). Each 10m of head is about 1 bar of pressure. Pick a pump whose head at your flow is comfortably above what you need. Not sure? Send us your setup (tank position, number of bathrooms, storeys) and we will recommend a pump.
Performance curve
CPM170 · 1.1 kW
Show the data table
| Flow m³/h | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.8 | 6 | 7.2 |
|---|---|---|---|---|---|---|---|---|---|---|
| Flow l/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 |
| Head m | 35 | 34.1 | 33.3 | 32.6 | 31.8 | 31 | 30.2 | 27.3 | 20.8 | 6 |
Source: Vega CPM Booster 25-01 catalogue. Performance at 50 Hz with clean water at 20 °C; actual duty within ISO 9906 tolerances.





Reviews
There are no reviews yet.