Pretoria based · Delivering nationwide

6″ Borehole Pumps

SP60-18 (VP62A-18) 6″ Borehole Pump 37kW – 252m Max Head

  • 6″
  • 37 kW
  • 252 m head

From R18,330.00

In stock

6" SP60 borehole pump, 37kW, up to 252m head. Available as a complete three-phase set or pump end only.

Configuration: choose one
  • Nationwide deliveryShipped from Pretoria
  • 12-month warrantyAgainst manufacturing defects
  • Expert advice061 744 1001
  • Secure checkoutEncrypted payment

Code: BH-SP60-18 Category:

Overview

The SP60-18 (VP62A-18) is a 6" stainless steel multistage submersible borehole pump from the SP60 range (nominal flow around 60 m³/h), delivering heads of up to 252m and flows up to 78 m³/h. It runs on a three-phase supply (380V or 525V). Choose a complete set, or just the pump end if you are replacing a worn one.

At a glance: delivers about 42 m³/h (42 000 litres per hour) at 186m head. Best for large-scale irrigation, farms, community and municipal water schemes and mining, where the borehole can deliver high volumes.

Available options:

  • 380V set: pump + water-filled motor (no starter): SP60-18 pump end + 37kW 380V three-phase water-filled 6" motor (starter panel not included)
  • 525V set: pump + water-filled motor (no starter): SP60-18 pump end + 37kW 525V three-phase water-filled 6" motor (starter panel/VSD not included)
  • Pump end only (no motor): SP60-18 pump end (wet end) only – to replace a worn pump end on an existing 37kW 6" motor
  • Motor power: 37kW
  • Pump diameter: 6" – needs a borehole with an internal diameter of at least 150mm
  • Stainless steel pump construction

Performance Table:

Flow (m³/h) Flow (l/min) Head (m)
0 0 252
6 100 251
12 200 250
18 300 245
24 400 233
30 500 216
36 600 199
42 700 186
48 800 173
54 900 159
60 1000 141
66 1100 119
72 1200 93
78 1300 65

Choosing the right pump: add the depth to your borehole’s pumping water level, the height up to your tank or reservoir and about 10% for pipe friction – that’s your total head. Pick a pump whose head at the flow you need is higher than that total. Your borehole must also be able to deliver that flow – ask your driller for the yield-test result, otherwise the pump can run the borehole dry. Not sure which pump fits? Send us your borehole depth, water level, yield and how far/high you need to pump and we’ll recommend the right model before you order.

Oil-filled or water-filled motor? Both drive the pump in the same way. Oil-filled motors are sealed units (rated 25 bar). Water-filled motors (rated 35 bar) can usually be rewound if they burn out, which normally makes repairs cheaper on bigger motors.

Starter / controller: motors above 30kW need a soft starter, star-delta panel or VSD sized by your electrician – these are not included. Ask us for a quote on the complete installation. See all Borehole Controllers.

Not included: submersible cable, rope, delivery pipe and base plate. Large borehole pumps are often supplied to order – contact us to confirm stock and delivery time.

Performance curve

VP62-18 · 37 kW

050100150200250300020406080100 0 m³/h (0 l/min) → 258 m10.2 m³/h (170 l/min) → 252 m20.1 m³/h (335 l/min) → 239 m30.1 m³/h (501.67 l/min) → 217 m40.2 m³/h (670 l/min) → 191 m50.1 m³/h (835 l/min) → 166 m60 m³/h (1000 l/min) → 142 m70 m³/h (1166.67 l/min) → 111 m78 m³/h (1300 l/min) → 76 m Flow (m³/h) Head (m)

Check your duty point Enter the flow you need and the total head (height + pipe friction).

Show the data table
Flow m³/h010.220.130.140.250.1607078
Flow l/min0170335502670835100011671300
Head m25825223921719116614211176

Source: Vega 6VP Borehole 2023 V1 catalogue. Performance at 50 Hz with clean water at 20 °C; actual duty within ISO 9906 tolerances.

Reviews

There are no reviews yet.

Be the first to review “SP60-18 (VP62A-18) 6″ Borehole Pump 37kW – 252m Max Head”

Your email address will not be published. Required fields are marked *

SP60-18 (VP62A-18) 6″ Borehole Pump 37kW – 252m Max HeadFrom R18,330.00
Choose options

Free pump sizing advice

Not sure which pump you need?

Send us your borehole depth, water level and yield – or how many taps and showers you need to run – and we’ll recommend the right pump, motor and controller.

Chat