Pretoria based · Delivering nationwide

0
10″ Borehole Pumps

10SP135/10 10″ Borehole Pump End 110kW – 313m Max Head (motor on request)

  • 10″
  • 110 kW
  • 313 m head

R33,790.00

In stock

10" 10SP135 borehole pump, 110kW, up to 313m head. Pump end only – motor quoted on request.

  • Nationwide deliveryShipped from Pretoria
  • 12-month warrantyAgainst manufacturing defects
  • Expert advice061 744 1001
  • Secure checkoutEncrypted payment

Code: 10040180 Category:

Overview

The 10SP135/10 is a 10" stainless steel multistage submersible borehole pump from the 10SP135 range (nominal flow around 135 m³/h), delivering heads of up to 313m and flows up to 180 m³/h. It runs on a three-phase supply (380V or 525V). Supplied as the pump end; the 8" 110kW motor is quoted on request.

At a glance: delivers about 90 m³/h (90 000 litres per hour) at 253m head. Best for large irrigation schemes, municipal water supply and mine dewatering from high-yield boreholes.

  • Motor power: 110kW
  • Pump diameter: 10" – needs a borehole with an internal diameter of at least 250mm
  • Motor size: 8" motor
  • Stainless steel pump construction

Performance Table:

Flow (m³/h) Flow (l/min) Head (m)
0 0 313
18 300 310
36 600 297
54 900 287
72 1200 270
90 1500 253
108 1800 233
126 2100 213
144 2400 193
162 2700 167
180 3000 133

Choosing the right pump: add the depth to your borehole’s pumping water level, the height up to your tank or reservoir and about 10% for pipe friction – that’s your total head. Pick a pump whose head at the flow you need is higher than that total. Your borehole must also be able to deliver that flow – ask your driller for the yield-test result, otherwise the pump can run the borehole dry. Not sure which pump fits? Send us your borehole depth, water level, yield and how far/high you need to pump and we’ll recommend the right model before you order.

Not included: submersible cable, rope, delivery pipe and base plate. Large borehole pumps are often supplied to order – contact us to confirm stock and delivery time.

Performance curve

10SP135-10 · 110 kW

0100200300400050100150200 0 m³/h (0 l/min) → 313 m18 m³/h (300 l/min) → 310 m36 m³/h (600 l/min) → 297 m54 m³/h (900 l/min) → 287 m72 m³/h (1200 l/min) → 270 m90 m³/h (1500 l/min) → 253 m108 m³/h (1800 l/min) → 233 m126 m³/h (2100 l/min) → 213 m144 m³/h (2400 l/min) → 193 m162 m³/h (2700 l/min) → 167 m180 m³/h (3000 l/min) → 133 m Flow (m³/h) Head (m)

Check your duty point Enter the flow you need and the total head (height + pipe friction).

Show the data table
Flow m³/h01836547290108126144162180
Flow l/min03006009001200150018002100240027003000
Head m313310297287270253233213193167133

Source: Vega 10SP Borehole 25-01 catalogue. Performance at 50 Hz with clean water at 20 °C; actual duty within ISO 9906 tolerances.

Reviews

There are no reviews yet.

Be the first to review “10SP135/10 10″ Borehole Pump End 110kW – 313m Max Head (motor on request)”

Your email address will not be published. Required fields are marked *

You may also need

10SP135/10 10″ Borehole Pump End 110kW – 313m Max Head (motor on request)R33,790.00
Add to cart

Free pump sizing advice

Not sure which pump you need?

Send us your borehole depth, water level and yield – or how many taps and showers you need to run – and we’ll recommend the right pump, motor and controller.

012 881 1962
Chat