Pretoria based · Delivering nationwide

0
10″ Borehole Pumps

10SP135/9 10″ Borehole Pump End 110kW – 282m Max Head (motor on request)

  • 10″
  • 110 kW
  • 282 m head

R31,400.00

In stock

10" 10SP135 borehole pump, 110kW, up to 282m head. Pump end only – motor quoted on request.

  • Nationwide deliveryShipped from Pretoria
  • 12-month warrantyAgainst manufacturing defects
  • Expert advice061 744 1001
  • Secure checkoutEncrypted payment

Code: 10040179 Category:

Overview

The 10SP135/9 is a 10" stainless steel multistage submersible borehole pump from the 10SP135 range (nominal flow around 135 m³/h), delivering heads of up to 282m and flows up to 180 m³/h. It runs on a three-phase supply (380V or 525V). Supplied as the pump end; the 8" 110kW motor is quoted on request.

At a glance: delivers about 90 m³/h (90 000 litres per hour) at 228m head. Best for large irrigation schemes, municipal water supply and mine dewatering from high-yield boreholes.

  • Motor power: 110kW
  • Pump diameter: 10" – needs a borehole with an internal diameter of at least 250mm
  • Motor size: 8" motor
  • Stainless steel pump construction

Performance Table:

Flow (m³/h) Flow (l/min) Head (m)
0 0 282
18 300 279
36 600 267
54 900 258
72 1200 243
90 1500 228
108 1800 210
126 2100 192
144 2400 174
162 2700 150
180 3000 120

Choosing the right pump: add the depth to your borehole’s pumping water level, the height up to your tank or reservoir and about 10% for pipe friction – that’s your total head. Pick a pump whose head at the flow you need is higher than that total. Your borehole must also be able to deliver that flow – ask your driller for the yield-test result, otherwise the pump can run the borehole dry. Not sure which pump fits? Send us your borehole depth, water level, yield and how far/high you need to pump and we’ll recommend the right model before you order.

Not included: submersible cable, rope, delivery pipe and base plate. Large borehole pumps are often supplied to order – contact us to confirm stock and delivery time.

Performance curve

10SP135-9 · 110 kW

050100150200250300350050100150200 0 m³/h (0 l/min) → 282 m18 m³/h (300 l/min) → 279 m36 m³/h (600 l/min) → 267 m54 m³/h (900 l/min) → 258 m72 m³/h (1200 l/min) → 243 m90 m³/h (1500 l/min) → 228 m108 m³/h (1800 l/min) → 210 m126 m³/h (2100 l/min) → 192 m144 m³/h (2400 l/min) → 174 m162 m³/h (2700 l/min) → 150 m180 m³/h (3000 l/min) → 120 m Flow (m³/h) Head (m)

Check your duty point Enter the flow you need and the total head (height + pipe friction).

Show the data table
Flow m³/h01836547290108126144162180
Flow l/min03006009001200150018002100240027003000
Head m282279267258243228210192174150120

Source: Vega 10SP Borehole 25-01 catalogue. Performance at 50 Hz with clean water at 20 °C; actual duty within ISO 9906 tolerances.

Reviews

There are no reviews yet.

Be the first to review “10SP135/9 10″ Borehole Pump End 110kW – 282m Max Head (motor on request)”

Your email address will not be published. Required fields are marked *

You may also need

10SP135/9 10″ Borehole Pump End 110kW – 282m Max Head (motor on request)R31,400.00
Add to cart

Free pump sizing advice

Not sure which pump you need?

Send us your borehole depth, water level and yield – or how many taps and showers you need to run – and we’ll recommend the right pump, motor and controller.

012 881 1962
Chat