Pretoria based · Delivering nationwide

0
10″ Borehole Pumps

10SP135/8 10″ Borehole Pump End 92kW – 250m Max Head (motor on request)

  • 10″
  • 92 kW
  • 250 m head

R28,830.00

In stock

10" 10SP135 borehole pump, 92kW, up to 250m head. Pump end only – motor quoted on request.

  • Nationwide deliveryShipped from Pretoria
  • 12-month warrantyAgainst manufacturing defects
  • Expert advice061 744 1001
  • Secure checkoutEncrypted payment

Code: 10040178 Category:

Overview

The 10SP135/8 is a 10" stainless steel multistage submersible borehole pump from the 10SP135 range (nominal flow around 135 m³/h), delivering heads of up to 250m and flows up to 180 m³/h. It runs on a three-phase supply (380V or 525V). Supplied as the pump end; the 8" 92kW motor is quoted on request.

At a glance: delivers about 90 m³/h (90 000 litres per hour) at 202m head. Best for large irrigation schemes, municipal water supply and mine dewatering from high-yield boreholes.

  • Motor power: 92kW
  • Pump diameter: 10" – needs a borehole with an internal diameter of at least 250mm
  • Motor size: 8" motor
  • Stainless steel pump construction

Performance Table:

Flow (m³/h) Flow (l/min) Head (m)
0 0 250
18 300 248
36 600 238
54 900 230
72 1200 216
90 1500 202
108 1800 186
126 2100 170
144 2400 154
162 2700 134
180 3000 106

Choosing the right pump: add the depth to your borehole’s pumping water level, the height up to your tank or reservoir and about 10% for pipe friction – that’s your total head. Pick a pump whose head at the flow you need is higher than that total. Your borehole must also be able to deliver that flow – ask your driller for the yield-test result, otherwise the pump can run the borehole dry. Not sure which pump fits? Send us your borehole depth, water level, yield and how far/high you need to pump and we’ll recommend the right model before you order.

Not included: submersible cable, rope, delivery pipe and base plate. Large borehole pumps are often supplied to order – contact us to confirm stock and delivery time.

Performance curve

10SP135-8 · 92 kW

050100150200250300050100150200 0 m³/h (0 l/min) → 250 m18 m³/h (300 l/min) → 248 m36 m³/h (600 l/min) → 238 m54 m³/h (900 l/min) → 230 m72 m³/h (1200 l/min) → 216 m90 m³/h (1500 l/min) → 202 m108 m³/h (1800 l/min) → 186 m126 m³/h (2100 l/min) → 170 m144 m³/h (2400 l/min) → 154 m162 m³/h (2700 l/min) → 134 m180 m³/h (3000 l/min) → 106 m Flow (m³/h) Head (m)

Check your duty point Enter the flow you need and the total head (height + pipe friction).

Show the data table
Flow m³/h01836547290108126144162180
Flow l/min03006009001200150018002100240027003000
Head m250248238230216202186170154134106

Source: Vega 10SP Borehole 25-01 catalogue. Performance at 50 Hz with clean water at 20 °C; actual duty within ISO 9906 tolerances.

Reviews

There are no reviews yet.

Be the first to review “10SP135/8 10″ Borehole Pump End 92kW – 250m Max Head (motor on request)”

Your email address will not be published. Required fields are marked *

You may also need

10SP135/8 10″ Borehole Pump End 92kW – 250m Max Head (motor on request)R28,830.00
Add to cart

Free pump sizing advice

Not sure which pump you need?

Send us your borehole depth, water level and yield – or how many taps and showers you need to run – and we’ll recommend the right pump, motor and controller.

012 881 1962
Chat